Iota CE Series User Manual download pdf

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed, including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1. Installation and servicing should be performed by qualiﬁed personnel.

2. Install in accordance with the National Electrical Code and local regulations.

3. CAUTION – This ﬁxture may provide more than one power supply output source. To reduce the risk of electrical shock, discon-

nect power by turning off the A.C. branch circuit, and follow the installation instructions in their proper sequence as outlined.

4. Not for use in heated air outlets or hazardous locations.

5. Do not mount near gas or electric heaters.

6. This unit may use a high-temperature Ni-Cad battery. Recycle or dispose of the nickel cadmium battery properly when replac-

ing or removing this product.

7. The unit should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized

personnel.

8. When using conduit, use ﬂexible conduit only.

9. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition, void warranty, and

result in non-compliance with UL speciﬁcations.

10. Do not use this equipment for other than intended use.

11. This unit requires an unswitched A.C. power source of either 120 or 277 volts. Properly cap the unused A.C. lead.

12. Suitable for use in damp locations.

13. For use in 50° F minimum, 104° F maximum ( 10° - 40° C) ambient temperatures.

14. Allow battery (if present) 24 hours to charge before ﬁrst use.

15. Electricians and end-users need to ensure proper operation before ﬁnal installation.

SAVE THESE INSTRUCTIONS

INSTALLATION MANUAL

EXIT SIGN MODELS

CEGA, CERA, CEGB, CERB

P.O. BOX 11846 TUCSON, AZ 85734

(520) 294-3292 • FAX (520) 741-2837

www.iotaengineering.com

1 2 3 4

Summary of Contents

Page 1 - IMPORTANT SAFEGUARDS

IMPORTANT SAFEGUARDSWhen using electrical equipment, basic safety precautions should always be followed, including the following:READ AND FOLLOW ALL S

Page 2 - Testing and Maintenance

Page 2Testing and MaintenancePressing the Test Button turns off the AC Indicator light and forces the unit into emergency mode and activates the lamps

Page 3 - DIAGRAM 4 - CEILING MOUNTING

Page 3Remove EXIT panel from the housing by pullingcarefully at the top of the EXIT panelSnap EXIT panel to the housing bottom ﬁrst and then topHoldin

Page 4 - DIAGRAM 6 - Back Mounting

Page 41) Housing2) EXIT panel3) Back plate4) Red or Green diffuser5) Housing screws 6) Canopy7) Canopy screws8) Crossbar9)

Comments to this Manuals

No comments

Iota CE Series User Manual

Browse online or download User Manual for Power suppliers Iota CE Series. IOTA CE Series User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Power suppliers Iota CE Series